EasyManuals Logo

Vogt AM Series User Manual

Vogt AM Series
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background image
21
Arming and
Disarming
Ar
ming and Disarming
8.1 Rules for Arming and Disarming
Before proceeding with the assembly or disassembly of the pump, keep in mind that:
Personnel responsible for operation, maintenance, inspection and assembly must be suitably qualified and authorized.
The scope of responsibility and supervision of the personnel must be exactly defined by the plant operator.
The plant operator must ensure that the operating instructions are fully understood by the personnel.
In order to be eligible for the warranty period of the warranty offered by VOGT S.A., it is necessary that:
o The instructions in this manual have been followed correctly.
o The equipment must be disassembled only by authorized personnel of our Technical Assistance Services or directly
by personnel from our factory.
Any modification of the equipment must be previously consulted with VOGT S.A. For safety reasons, spare parts and
accessories authorized by VOGT S.A. must be used.
The use of non-original spare parts exempts VOGT S.A. from any responsibility.
Before proceeding to assemble or disassemble the pump, make sure that:
o The motor cannot be operated accidentally and must therefore be disconnected from the mains (e.g. remove fuses,
unplug, switch off circuit breaker, etc.).
o The pump is free of pumped fluid, cleaning it internally with appropriate liquid in case it is a hazardous fluid (hot,
pollutant, flammable, etc.).
o The pump is disconnected from suction and discharge piping and its base.
During arming or disarming of the pump:
o Never use fire or heat to disassemble the pump.
o Never strike the pump elements.
o Always use suitable tools.
o Never assemble the pump with damaged parts or components.
After a longer period of operation, it is possible that individual parts may become disassembled or dismantled with difficulty.
If necessary, use a known deoxidizer or, if possible, a suitable disassembly device. NEVER USE INAPPROPRIATE FORCE
which could damage the part, the pump or persons.
During arming or disarming consider the exploded view of the pump in section 8.5.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vogt AM Series and is the answer not in the manual?

Vogt AM Series Specifications

General IconGeneral
BrandVogt
ModelAM Series
CategoryWater Pump
LanguageEnglish

Related product manuals