SEATS
IN CAB
Individual
driver's
and
front
passen-
ger
seats
To
move
seats back
or
forward
Lift
lever (1) on outside of seat and move
seat.
Then release lever and move seat
further
so
that
catch engages.
Caution
• For
safety
reasons the
seats
should
only
be
adjusted
when
vehicle
is
stationary.
To
adjust
backrest
rake
Take
weight off backrest, press lever (2)
on
right
side of seat frame down and
move backrest to desired position by
moving upper part of body then release
lever.
|B25-548|
Caution
• Do not
lower
the
backrest
too far
when
on the
move
because the
seat
belts
are
then
no
longer
fully
effective.
Armrests*
The armrests on the
front
seats can be
hinged up if they are not required.
The angle of the armrests can be adjusted
as
required
with
a knurled knob under-
neath the armrest.
To
take
seat
out
• Slide seat forward
into
1
st latch c: :-
tion.
•
Lift
hook (3) against spring-loac -;
at the same time pull lever (1), he : I
and slide seat past stop.
•
Release
hook and lever and p.r
seat
forward out of runners.
• The hook need not be
lifted
w-a
putting
seat back as the seat,
with
rm
lever lifted, can
just
be pushed past ~^
stop.
Seat
heating*
Seat
cushion and backrest of drive's
seat
can be heated electrically whe-
ignition is on.
Further details are give unce
"Switches",
page 40.
Head
restraints*
The head restraints must be adjusted ::
body
size
- see page 15.