Volkswagen Caravelle User Manual

OPERATION
REAR SEAT/FULLY RECLINING SEAT BENCH*
The rear seat/reclining seat bench can
be converted into a large sleeping area.
Before doing this, the backrests of the
center row of seats must be tipped for-
ward. The latching levers are located on
the outsides of the right and left hand
backrests.
To convert reclining seat bench
• Remove head restraints* -
see page 15.
• Unlatch the backrest with the release
grip on the reverse side of the backrest,
and fold the backrest forwards.
| &25-^05 \
• By pulling the release grip further
towards the front, the backrest and seat
bench are pulles in a forward direction.
• Finally, fold the seat backrest fully to
the rear to form a flat sleeping area.
Returning seat bench to original
position
• Pull the seat backrest upwards out of
the horizontal position.
• Slide the seat bench, together with
backrest to the rear again.
• Push backrest back into locking posi-
tion.
• Pull the seat belts out again between
backrest and seat, so that they are in a
position for use.
• Install head restraints* -
see page 15.
The space underneath the seat bench
can be used as a storage compartment.
For this, it is necessary to lift the seat
bench slightly at the front. It will remain
in the lifted position when the strut,
located on the left on the sliding door
side, is swung upwards.
21
www.vwT25camper.info - a useful website for owners and enthusiasts of VW T25 / T3 / Vanagon Campervans

Volkswagen Caravelle Specifications

General

Brand	Volkswagen
Model	Caravelle
Category	Automobile
Language	English