VAS 581 009 unpacking instructions, placing into service, quick start guide
V2.00 05/18 All rights reserved.
4.6 Oil/UV additive scales zeroing
1. Select Reset Oil/UV additive scales to zero.
Fig. 4-14 Oil/UV additive scales zeroing
2. Start Oil/UV additive scales zeroing .
Fig. 4-15 Scales zeroing
Follow the instructions on the display. (e.g. mount empty oil/UV additive
containers, etc.).
Note:
The mounted oil containers must be completely empty for zeroing. If this is not
the case, an error message may occur during zeroing.
3. "Oil/UV additive scales zeroing" is complete.
4. Exit "Oil/UV additive scales zeroing" with .