Trailering Your Boat
1. Before loading your boat on the trailer, tilt the
drive unit up.
2. After your boat is on the trailer, completely lower
the drive unit until the drive drains thoroughly.
22800
3. Rinse the entire drive exterior with fresh water.
NOTICE! Before moving the trailer, tilt the drive
as high as possible and secure it in place.
NOTICE! Be very careful of high or low spots
when backing up or crossing railroad tracks; there
is a possibility that the sterndrive may hit the
ground.
4. When you have reached your destination, if the
boat will be stored on the trailer, the drive should
be tilted down.
Engine Shutdown
47700385 05-2009 47
To Next Page
Loading...
Need help?
General
