EasyManuals Logo

Volvo Penta D13 MP User Manual

Volvo Penta D13 MP
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #44 background imageLoading...
Page #44 background image
Engine Shutdown
Allow the engine to run at low idle, in neutral, for a few minutes after operations are completed. In this way after-
boiling is avoided at the same time as temperature equalization takes place. This is especially important when
the engine has been run at high rpm or under heavy load.
Stop the Engine
If a station is active and locked the engine(s) can only
be started and stopped from that station.
IMPORTANT!
Never disconnect the current with the main switches
when the engine is running. The alternator and elec-
tronics could be damaged..
IMPORTANT!
Make sure the starter key is in 0-position or removed
before main switches are switched off. Otherwise the
alternator and electronics could be damaged.
Stop with key
1 Disengage the reverse gear by putting the control
lever in neutral.
2 Turn the key to stop position “S”.
The starter key must be in the i “0” position or
removed before main switches are switched off.
Stopping with the stop button
1 Disengage the reverse gear by putting the control
lever in neutral.
2 Push the stop button(s). Release the button(s)
when the engine(s) has/have stopped.
P0013099
42 47706669 05-2015 © AB VOLVO PENTA

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Volvo Penta D13 MP and is the answer not in the manual?

Volvo Penta D13 MP Specifications

General IconGeneral
BrandVolvo Penta
ModelD13 MP
CategoryEngine
LanguageEnglish

Related product manuals