Volvo Penta D3-110i User Manual

37
Starting the engine
Starting method
Put the lever control in neutral
Put the drive in neutral by moving the control lever(s)
to neutral at all control positions.
Turn the ignition on
Turn the starter key to position "I" to switch the ignition on.
Check the LEDs
Each time the ignition is turned on, all LEDs are illumi-
nated on the main control panel. Check that all LEDs
function.
Check the tachometer display
If a fault is registered it will be shown in the tachom-
eter display.

Volvo Penta D3-110i Specifications

General

Brand	Volvo Penta
Model	D3-110i
Category	Engine
Language	English