Technical data: TD/TAD420VE, TAD620VE, TAD650VE, TAD660VE
22
Group 20
Viscosity
The viscosity should be selected from the adjacent
table.
NOTE! the temperatures refer to constant outside air
temperature. The tabell above refers to synthetic or
synthetic-based oil.
Fuel sulfur content in percent by weight
Lubricating system
Up to 0.5 % 0.5 – 1 % More than 1 %
1)
Oil change interval: In operation whichever reached first
Oil grade
2)
VDS-3, VDS-2
ACEA: E7, E5, E3 500 hours or 12 months 250 hours or 12 months 125 hours or 12 months
API: CI-4, CH-4, CG-4
1)
If the sulfur content is > 1.0% by weight, use oil with TBN > 15
2)
For markets outside Europe, API: CG-4 and CH-4 can be used instead of ACEA: E3.
NOTE! Mineral based oil, either fully or semi-synthetic, can be used on condition that it complies with the quality
requirements above.
NOTE! For 6 and 7-liter engines equipped with low profile type oil pans, the oil change interval must be halved.
VDS = Volvo Drain Specification
ACEA = Association des Constructeurs Européenne d’Automobiles
API = American Petroleum Institute
Global DHD = Global Diesel Heavy Duty
TBN = Total Base Number
To Next Page
Loading...
Need help?
General
