Drive Belt, Check and Replace
CAUTION!
Pinch hazard. Keep fingers clear.
IMPORTANT:
Always change a belt that is oily, worn or damaged.
Check
Check the drive belt after operation, when the belt is
hot. It should be possible to depress the drive belt
about 3-4 mm (0.12–0.16") between the pulleys. The
drive
belt has an automatic belt tensioner and therefore
does not need to be adjusted.
Replacement
1 Remove the right belt guard.
2 Undo the belt tensioner and restrain it with a
mandrel.
Remove the old drive belt.
P0019257
P0019255
Maintenance
56
47711083 09-2018 © AB VOLVO PENTA
To Next Page
Loading...
Need help?
General
