Technical Data: TD/TAD720-722, TAD730/733, TAD750/760
70
Group 20
Viscosity
The viscosity should be selected from the adjacent
table.
NOTE! the temperatures refer to constant outside air
temperature. The tabell above refers to synthetic or
synthetic-based oil.
Lubricating system
Sulfur content in fuel, by weight
Engine Oilgrade
2)
< 0,5 % 0,5 – 1,0 % > 1,0 %
1)
Oil change interval, reached first in operation
T(A)D720-721VE VDS-3 500 h / 12 months 250 h / 12 months 125 h / 12 months
T(A)D720GE VDS-2
TAD730/731GE, ACEA: E7, E5, E3
TAD721/722GE, API: CI-4, CH-4, CG-4
TAD732/TAD733GE,
TAD750/760VE, open
crankcase ventilation
TAD721/722GE, ACEA: E4 500 h / 12 months 250 h / 12 months 125 h / 12 months
TAD732/733GE, API: CI-4, CH-4
TAD750/760VE, closed NOTE! Fully synthetic oil must be used
crankcase ventilation
TAD722VE ACEA: E4
power<200kW 500 h / 12 months 250 h / 12 months 125 h / 12 months
power>200kW 250 h / 12 months 125 h / 12 months 60 h / 12 months
1)
If the sulfur content is > 1.0% by weight, use oil with TBN > 15 closed crankcase ventilation
2)
For markets outside Europe, API: CG-4 and CH-4 can be used instead of ACEA: E3.
NOTE! Mineral based oil, either fully or semi-synthetic, can be used on condition that it complies with the quality
requirements above.
NOTE! For 6 and 7-liter engines equipped with low profile type oil pans, the oil change interval must be halved.
VDS = Volvo Drain Specification
ACEA = Association des Constructeurs Européenne d’Automobiles
API = American Petroleum Institute
Global DHD = Global Diesel Heavy Duty
TBN = Total Base Number
To Next Page
Loading...
Need help?
General
