BABY UNIT OPERATION
17
5.7 Talk to the baby unit
You can broadcast messages from the parent unit to the baby unit.
To talk to the baby unit:
Press and hold TALK on the side of the parent unit. Speak towards the
microphone on the parent unit. The screen displays TALK. Your voice is
broadcast to the baby unit.
NOTES
If the speaker volume of the parent unit is set to OFF, it will be reset to the
default volume after you press and hold TALK.
Lullaby playback is paused when the parent unit is talking the baby unit.
Lullaby playback resumes when the parent unit nishes using the TALK
feature.
5.8 Temperature
The parent unit constantly displays the temperature detected by the
temperature sensor on the baby unit. When the detected temperature is
lower than 14°C, the screen displays LOW TEMP. When the detected
temperature is higher than 37°C, the screen displays HIGH TEMP.
NOTE
There might be a small difference between the baby monitor reading and the actual
temperature.
•
•
To Next Page
Loading...
Need help?
General
