VTech CTM-S2415HC User Manual

EN - 15
English
Operation
SIP Contemporary Cordless 1-line Hotel
Telephone - CTM-S2415
SIP Contemporary Cordless 1-line
Accessory Handset - CTM-C4402
Using the cordless handset and the
telephone base
The cordless handset and the telephone base
cannot be used on the same call. However, calls
can be switched between the cordless handset
and the telephone base speakerphone.
When the cordless handset or the telephone
base is in use, the FLASH/TALK key on the
cordless handset and the MESSAGE WAITING
LED on the telephone base illuminate.
Receive a call
When there is an incoming call, the telephone
rings and the MESSAGE WAITING LED flashes.
Answer a call using the cordless handset
while it is not on the telephone base or
charging stand
On the cordless handset, press FLASH/TALK or
/ SPEAKER.
• The FLASH/TALK key illuminates when in use.
The
/ SPEAKER key illuminates when in
speakerphone mode.
Answer a call using the cordless handset
while it is cradled on the telephone base or
charging stand
Lift the cordless handset from the telephone
base or charging stand.
• The FLASH/TALK key illuminates when in use.
The
/ SPEAKER key illuminates when in
speakerphone mode.
Answer a call using the telephone base
On the telephone base, press / SPEAKER.
• The MESSAGE WAITING LED and the
/
SPEAKER key illuminate when in use.
Place a call
Place a call using the cordless handset
On the cordless handset, press FLASH/TALK or
/ SPEAKER. Listen for a dial tone and then dial
the desired number, or press a Speed Dial key
on the cordless handset to dial a programmed
number.
• The FLASH/TALK key illuminates when in use.
The
/ SPEAKER key illuminates when in
speakerphone mode.
Place a call using the telephone base
On the telephone base, press / SPEAKER.
Listen for a dial tone and then dial the desired
number, or press a Speed Dial key on the
telephone base to dial a programmed number.
• The MESSAGE WAITING LED and the
/
SPEAKER key illuminate when in use.
End a call
End a call when using the cordless handset
Press OFF on the cordless handset or place it in
the telephone base or charging stand. The call
ends when all handsets hang up.
End a call when using the telephone base
Press / SPEAKER.
Switch a call between the cordless
handset and the telephone base
speakerphone
• To switch a call from the cordless handset
to the telephone base speakerphone,
press SPEAKER on the telephone base.

VTech CTM-S2415HC Specifications

General

Brand	VTech
Model	CTM-S2415HC
Category	Handsets
Language	English