Telephone settings
10
Home area code
If you dial local calls using only seven digits (area code not required), you
can program your home area code so that when you receive a call within
your local area, the telephone number is automatically stored in the call log
without the area code.
To change the setting:
Press MENU/SELECT when the handset is not in use.
Press CID or until the screen displays
Settings, then press MENU/SELECT.
Press CID or until the screen displays
Home area code, then press MENU/SELECT. The
screen displays the currently stored home area code.
Use the dialing keys (0-9) to enter the desired home
area code.
Press MUTE/DELETE to delete a digit.
Press and hold MUTE/DELETE to delete all digits.
Press MENU/SELECT to conrm. You hear a conrmation tone.
Dial mode
If you have touch-tone service, the telephone is ready to use as soon
as the battery is charged. If you have pulse (rotary) service, you need to
change the dial mode to pulse dialing.
To change the setting:
Press MENU/SELECT when the handset is not in use.
Press CID or until the screen displays Settings, then
press MENU/SELECT.
Press CID or until the screen displays Dial mode, then
press MENU/SELECT.
Press CID or to choose Tone or Pulse, then press MENU/SELECT
to conrm your selection. You hear a conrmation tone.
Website
Use this feature to view the VTech website address.
Press MENU/SELECT when the handset is not in use.
Press CID or until the screen displays Website, then press
MENU/SELECT. The screen displays the VTech website address.
1.
2.
3.
4.
•
•
5.
1.
2.
3.
4.
1.
2.
Home area code
Home area code
___
If, in the future, your telephone service provider requires you to dial the
area code when making a local call, or, if you move to a location that
requires it, delete the home area code you have already programmed
following the steps above. After you have deleted the home area code,
___ appears.
To Next Page
Loading...
Need help?
General
