34
3. Press q or p to scroll to Star name list,
and press SELECT. The screen displays
Star this name? and the caller ID name
of the caller.
4. Press YES to confirm. The screen shows
Saved to star name list, and you hear a
confirmation tone.
Delete a star name entry
1. Search for the desired entry in the star
name list (see Review star name list).
2. When the desired entry displays, press
DELETE. The screen displays Delete
entry? and the name of the entry.
3. Press YES to confirm. The screen
shows Entry deleted, and you hear a
confirmation tone.
Delete all star name entries
1. Press Call block when the phone is not
in use.
-OR-
Press MENU when the phone is not in
use. Press q or p to scroll to Smart
call blk and then press SELECT.
2. Press q or p to scroll to Star name list
and then press SELECT.
3. Press q or p to scroll to Delete all and
then press SELECT. The screen displays
Delete all in star name list?.
4. Press YES to confirm. You hear a
confirmation tone.
Screening announcement
If you have set to screen calls without
numbers and/or screen uncategorized
calls, the callers of one or all of the
following incoming call categories will
hear a screening announcement.
• Calls that are “out of area” or with
numbers set to “Private”.
• Calls with numbers that are not in your
phonebook, allow list, or block list, or
with absent caller ID number.
• Calls with caller ID names that are not in
your star name list.
The telephone has two screening options,
and each option has its default screening
announcements.
Screening with caller name - “Hello. Calls
to this number are being screened by
Smart call blocker. Please say your name
after the tone, then press pound.”
-OR-
Screening without caller name - “Hello.
Calls to this number are being screened
by Smart call blocker. If you’re a family
member, friend or invited caller, please
press pound to be connected. If you’re a
solicitor, please hang up now.”
You can use these You can use these
announcements, or record your own
name to replace “this number” in both
announcements.
Play your current announcement of
screening with caller name
1. Press Call block when the phone is not
in use.
-OR-
Press MENU when the phone is not in
use. Press q or p to scroll to Smart
call blk and then press SELECT.
2. Press q or p to choose SCB Setup,
then press SELECT.
3. Press q or p to choose Line 1 or Line
2, then press SELECT.
4. Press q or p to choose Screening
annc, then press SELECT.
5. Press q or p to choose Play annc,
then press SELECT.
6. Press SELECT again to select w/ Caller
name. The announcement begins to
play, and the screen displays Playing
announcement....
To Next Page
Loading...
Need help?
General
