31
Telephone settings
Set date and time
The answering system announces the date and time of each message prior to
playing it. Before using the answering system, set the date and time as follows.
If you subscribe to caller ID service, the day, month and time are set automatically
with each incoming call. However, the year must be correct so that the day of the
week can be calculated from the caller ID information.
If you do not want to set the date and time automatically with caller ID information,
turn off the CID time synchronization feature (see page 35).
To manually set the date and time:
Press MENU when the handset is not in use.
Press or to scroll to Set date/time, then press SELECT.
Press or to select the month then press SELECT, or use
the dialing keys to enter a two-digit number (01-12).
Press or to select the date then press SELECT, or use the
dialing keys to enter a two-digit number (01-31).
Press or to select the year then press SELECT, or use the
dialing keys to enter a two-digit number (00-99) then
press SELECT.
Press or to select the hour then press SELECT, or use the
dialing keys to enter a two-digit number (01-12).
Press or to select the minute then press SELECT, or use
the dialing keys to enter a two-digit number (00-59).
Press or to scroll to AM or PM, or press 2 to choose AM or
press 7 to choose PM.
Press SELECT to save the settings and return to the previous
menu. You hear a confirmation tone.
If the date and time are not set when a message is recorded, the system
announces, “Time and date not set,” before each message plays.
The telephone plays two beeps if you enter an invalid number.
1.
2.
3.
4.
5.
6.
7.
8.
9.
•
•
Ringers
>Set date/time
SET DATE
MM/DD/YY
SET DATE
HH:MM --
To Next Page
Loading...
Need help?
General
