www.vtechphones.com
31
Basic Operation
BASIC OPERATION
Answering System Operation At the Base
3. To stop recording, press the PLAY/STOP again.
Window Display: When:
0
No messages.
1-98
Total number of messages, or message number during
message playback.
0-99 <--> F
Memory is full, or total number of messages is 99.
1 to 99 (counting)
Duration of announcement or memo recording (maximum
length of announcement is 90 seconds).
99 (flashing)
Length of recording is more than 99 seconds.
1-8 (on steady for one second)
Indicates volume level selected when VOL- or VOL
+
is pressed.
10 - 99
Current remote access code while setting.
A
Announce only mode.
1-98 and A (alternating)
System is set to announce only mode and the memory
is full.
ON or OFF (steady for one second)
Display when any setting is changed from on or off.
CL <--> (normal display)
Clock needs to be set.
-- (steady)
System is answering a call or is in remote operation.
-- (flashing)
System is in programming mode or initializing.
To Next Page
Loading...
Need help?
General
