STANDBY MODE
To preserve battery life, KidiMagic StarLight will automatically enter
standby mode if there is no operation for a period of time. You can
also press the Clock button to go to standby mode if you are already in
clock mode. The current time will be displayed even when in standby
mode. Press any button to wake up the unit.
MAGIC SENSOR CONTROL
The magic sensors detect palm movement above
them. Wave your palm left and right to activate the
sensors. You will be able to select different light
effects and play games using it.
The magic sensor is available only if the magic
sensor icon is shown at the top of the screen.
LIGHT CONTROL
Press the light button to switch between star and screen display lights
on, star light off and both lights off.
PROJECTION CONTROL
A projector is located on the top of KidiMagic StarLight. It allows the
current time to be projected onto the ceiling.
Press the projection button to turn the time display projection on or off.
When the time projection is turned on, the projection icon will be
shown at the top of the screen.
Rotate the projector focus lens clockwise and anticlockwise to adjust
the focus of projection display.
Switch the projection angle adjuster to adjust the projection angle.
VOLUME CONTROL
Press the volume button to adjust the volume. Use the left or the right
buttons to decrease or increase the volume.
Press the volume button again or any function button to save the
current settings.
1 2
520403 IM REV.indd 11520403 IM REV.indd 11 2021/8/6 9:29:342021/8/6 9:29:34
To Next Page
Loading...
Need help?
General