VTech Let's Go Rescue Pup User Manual

5
5
5
Hip Pouch and Belt Assembly
1. Identify the inner portion of the Fabric Belt by locating the long
section of the hook-and-loop closure.
2. With the inner portion of the belt facing the back of the Hip Pouch
where the two slots are, place the Fabric Belt ends through the
Hip Pouch slots from the inside of the pouch.
3. The seams will hold the Fabric Belt in place from the inside of the
Hip Pouch.
4. Put the Fabric Belt around the child’s waist and secure with the
hook-and-loop closure.
GETTING STARTED
Battery Removal and Installation
1. Make sure the unit is turned Off.
2. Find the battery cover located on the
bottom of the unit, use a screwdriver
to loosen the screw and then open
the battery cover.
3. Remove old batteries by pulling up
on one end of each battery.
Hip Pouch and Belt Assembly
1. Identify the inner portion of the Fabric Belt by locating the long
section of the hook-and-loop closure.
2. With the inner portion of the belt facing the back of the Hip Pouch
where the two slots are, place the Fabric Belt ends through the
Hip Pouch slots from the inside of the pouch.
3. The seams will hold the Fabric Belt in place from the inside of the
Hip Pouch.
4. Put the Fabric Belt around the child’s waist and secure with the
hook-and-loop closure.
GETTING STARTED
Battery Removal and Installation
1. Make sure the unit is turned Off.
2. Find the battery cover located on the
bottom of the unit, use a screwdriver
to loosen the screw and then open
the battery cover.
3. Remove old batteries by pulling up
on one end of each battery.

VTech Let's Go Rescue Pup Specifications

General

Brand	VTech
Model	Let's Go Rescue Pup
Category	Toy
Language	English