5
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is OFF.
2. Locate the battery cover on the bottom of the unit.
3. Open the battery cover.
4.Install 3 new “AA” size (AM-3/LR 6) batteries following the diagram
insidethebatterybox.(Theuseofnewalkalinebatteriesisrecommended
formaximumperformance.)
4. R Replace the battery cover and tighten the screw to secure.
BATTERY NOTICE
• The use of new alkaline batteries is recommended for maximum
performance;
• Non-rechargeablebatteriesarenottoberecharged.
• Rechargeable batteries are to be removed from the toy before being
charged(ifremovable).
• Rechargeablebatteriesareonlytobechargedunderadultsupervision(if
removable).
• Donotmixoldandnewbatteries.
• Donotmixbatteriesofdifferenttypes:alkaline,standard(carbon-zinc)or
rechargeable(nickel-cadmium)
• Onlybatteriesofthesameorequivalenttypeasrecommendedaretobeused;
• Batteriesaretobeinsertedwiththecorrectpolarity.
• Exhaustedbatteriesaretoberemovedfromthetoy.
• Thesupplyterminalsarenottobeshort-circuited.
• Thetoyisnottobeconnectedtomorethantherecommendednumberof
power supplies.
• Donotdisposeofbatteriesinfire.
WE DO NOT RECOMMEND THE USE OF RECHARGEABLE
BATTERIES.
GETTING STARTED