7
Assembly Instructions
1. Take the cord with both a dangling
character and leaf piece, then thread
it up through the bottom of the hole on
the large leaf. Set the knot so it rests
on the smaller hole on the leaf.
2. Take the cord with just a dangling
character piece and slide it through the
slit in the leaf. Set the knot so it rests
securely in the hole on the leaf.
3. Attach the turning leaf piece into the
recessed slot on top of the mobile
support post. You will hear a click when
the post is inserted correctly.
4. Attach the bottom of the mobile support
post into the recessed slot on the top of
the activity panel. You will hear a click
when the post is inserted correctly.
5. Place the unit in the cot against the top
rail. Press the yellow button and slide
the cot attachment strap up through the
slot behind the button. Repeat with the
second cot attachment strap.
Instructions & Activities
To Next Page
Loading...
Need help?
General