You hear a confirmation tone when the registration process completes. It takes up to 60 seconds to complete the registration. If registration fails, you hear an error tone, and the handset
display Registration failed. Start again from Step 1 above.
To register a handset to SN5147 telephone base:
1. Press and hold PAGE/INTERCOM at the telephone base for about five seconds until the visual ringer indicator light turns on. Release PAGE/INTERCOM.
2. Press the pound (#) key on the handset. The handset displays Registering…
Please wait to indicate the registration is in progress.
You hear a confirmation tone when the registration process completes. It takes up to 60 seconds to complete the registration. If registration fails, you hear an error tone, and the handset
display Registration failed. Start again from Step 1 above.
Deregister handsets
If you want to replace a handset or reassign the designated handset number of a registered handset, you must deregister all the handsets and then individually register each handset.
If you want to register a handset to another telephone base, you must deregister all devices, and then register each handset individually to the desired telephone base. ”
To deregister all handsets from the SN5127/SN5147 telephone base:
1. Press and hold PAGE or
PAGE/INTERCOM on the telephone base for about five seconds until the visual ringer indicator light on the telephone base turns on. Keep holding PAGE or PAGE/INTERCOM until the
visual ringer indicator light begins to flash. Release PAGE or PAGE/INTERCOM.
2. Immediately press PAGE or PAGE/INTERCOM again while the light is still flashing.
You hear a confirmation tone when the deregistration process completes. It takes about 10 seconds to complete the deregistration.
If deregistration fails, you need to reset the system and try again. To reset, unplug the power and the telephone line cord from the telephone base. Then, plug the cords back in again.
Operating range
This cordless telephone operates with the maximum power allowed by the Federal Communications Commission (FCC). Even so, this handset and telephone base can communicate over
only a certain distance – which can vary with the locations of the telephone base and handset, the weather, and the layout of your home or office. When the handset is out of range, the
handset displays Out of range or No pwr at the base.
If there is a call while the handset is out of range, it may not ring, or if it does ring, the call may not connect well when you press TALK/FLASH. Move closer to the telephone base, then
press TALK/FLASH to answer the call. If the handset moves out of range during a telephone conversation, there may be interference. To improve reception, move closer to the
telephone base.
ECO mode
This power-conserving technology reduces power consumption for optimal battery performance.
The ECO mode activates automatically whenever the handset is synchronized with the telephone base.
General product care
Taking care of your telephone
Your cordless telephone contains sophisticated electronic parts, so it must be treated with care.
Avoid rough treatment
Place the handset down gently. Save the original packing materials to protect your telephone if you ever need to ship it.
Avoid water
Your telephone can be damaged if it gets wet. Do not use the handset outdoors in the rain, or handle it with wet hands. Do not install the telephone base near a sink, bathtub or shower.
Electrical storms
Electrical storms can sometimes cause power surges harmful to electronic equipment. For your own safety, take caution when using electrical appliances during storms.
Cleaning your telephone
Your telephone has a durable plastic casing that should retain its luster for many years. Clean it only with a dry non-abrasive cloth. Do not use dampened cloth or cleaning solvents of any
kind.
Important safety instructions
When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury,
including the following:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.
4. Do not use this product near water such as near a bathtub, washbowl, kitchen sink, laundry tub, or swimming pool, or in a wet basement or shower.
5. Do not place this product on an unstable table, shelf, stand, or other unstable surfaces.
6. Avoid placing the telephone system in places with extreme temperature, direct sunlight, or other electrical devices. Protect your phone from moisture, dust, corrosive liquids, and
fumes.
To Next Page
Loading...
Need help?
Frequency Specifications
Power
Memory
