3
STEP 2: Choose Your Game Settings
Learning Adventure Mode
If you are playing for the first time or have selected “New Game,” you will be
asked to choose the game settings. (Default settings will be Level = Easy,
Player = 1 Player.) If you have selected “Continue Game,” the system will
use the game settings from your previous game.
Use the joystick to choose “New Game” or “Continue Game.” Press the
ENTER button when you have finished.
Continue Game: Choose this to continue a
previous game.
V
.
mOtION™
remembers your
game status after you turn it OFF, and if you turn
it back ON without removing the Smartridge
TM
,
you will have the choice of continuing your old
game. Your previous settings will be kept.
New Game: Choose this to start a new game.
Learning Zone Mode
Move the joystick up and down to switch
between level and player selection.
When you have finished the selection of level
and player mode, press the ENTER button to
start the game with the selected game settings.
Note:
Two-player mode is not available when
played on the V.Smile Pocket™ or V.Smile
Cyber Pocket™.
Game Control Method
In Learning Adventure and Learning Zone, you
can choose two different control methods to play
the game: “Motion Controller Mode” or “Joystick
Mode.”
Note: For the details of Motion Controller
Mode and
Joystick Mode, please refer to
the “Activities
– Learning Adventure” and
“Activities – Learning Zone” section.
1.
2.
To Next Page
Loading...
Need help?
General