VTech VS 113-4 User Manual

58
59
• Press 0 to add a space.
• Press VOICE/MUTE/DELETE on
the handset or X/DELETE on the
telephone base to erase a character.
• Press and hold
VOICE/MUTE/DELETE on the
handset or X/DELETE on the
telephone base to erase all
characters.
• Press TONE to change the next
letter to upper or lower case.
7. Press MENU/SELECT to save. You hear
a confirmation tone.
NOTES
• The screen shows Number repeated
if the number is already in the
phonebook. You cannot save the
same number more than once.
• If you try to save a caller ID log entry
to the phonebook without a number,
the handset sounds an error tone.
• If the telephone number has more
than 15 digits, only the last 15 digits
appear in the caller ID log. However,
the telephone can still save all digits
(up to 24 digits) of that telephone
number from the caller ID log in the
phonebook.
• You might need to change how a caller
ID number is saved in the phonebook
if the entry does not appear in the
correct format. Caller ID numbers
might appear with an area code that is
not necessary for local calls, or without
a 1 that is necessary for long distance
calls.
Save a caller ID log entry to allow list
1. Search for the desired caller ID log
entry (See Review the caller ID log).
2. When the desired entry appears,
press MENU/SELECT.
3. Press q CID or p to highlight To
Allow list on the handset, or Allow list
on the telephone base, and then press
MENU/SELECT. The screen displays
Enter number.
4. Use the dialing keys to edit the
number, if necessary.
• Press q CID or p to move the
cursor to the left or right.
• Press VOICE/MUTE/DELETE on
the handset or X/DELETE on the
telephone base to erase a digit.
• Press and hold
VOICE/MUTE/DELETE on the
handset or X/DELETE on the
telephone base to erase all digits.
• Press and hold REDIAL/PAUSE to
insert a three-second dialing pause
(a P appears).
5. Press MENU/SELECT. The handset
displays Enter name.
6. Use the dialing keys to edit the name.
• Press q CID or p to move the
cursor to the left or right.
• Press 0 to add a space.
• Press VOICE/MUTE/DELETE on
the handset or X/DELETE on the
telephone base to erase a character.
• Press and hold
VOICE/MUTE/DELETE on the
handset or X/DELETE on the
telephone base to erase all
characters.
• Press TONE to change the next
letter to upper or lower case.
7. Press MENU/SELECT to confirm. You
hear a confirmation tone.
Save a caller ID log entry to call block
list
1. Search for the desired caller ID log
entry (See Review the caller ID log).
2. When the desired entry appears,
press MENU/SELECT.
3. Press q CID or p to highlight To
Block list on the handset, or Block
list on the telephone base, and then
press MENU/SELECT. The screen
displays Enter number.
4. Use the dialing keys to edit the
number, if necessary.
• Press q CID or p to move the
cursor to the left or right.
• Press VOICE/MUTE/DELETE on
the handset or X/DELETE on the
telephone base to erase a digit.
• Press and hold
VOICE/MUTE/DELETE on the
handset or X/DELETE on the
telephone base to erase all digits.
• Press and hold REDIAL/PAUSE
to insert a three-second dialing
pause (a P appears).
5. Press MENU/SELECT. The handset
displays Enter name.
6. Use the dialing keys to edit the name.
• Press q CID or p to move the
cursor to the left or right.
• Press 0 to add a space.
• Press VOICE/MUTE/DELETE on
the handset or X/DELETE on
the telephone base to erase a
character.

VTech VS 113-4 Specifications

General

Brand	VTech
Model	VS 113-4
Category	Telephone
Language	English