Wacker Neuson AS30e User Manual

Accessories
Transport roller 15.1
55
[us] | 06/2020 | 5100056974 | AS | Operator’s manual
15 Accessories
15.1 Transport roller
CAUTION
Risk of injury and possible machine damage!
Using non-original accessories or spare parts can lead to injuries or ma-
chine damage.
► Use only original parts.
► In case of disregard, no liability will be accepted.
Information
Buy original WackerNeuson accessories and spare parts online!
Many accessories and spare parts are available for all WackerNeuson
product groups online at www.wackerneuson.com.
15.1.1 Transport roller installation
1
3
4
5
2
1 Guide bracket
2 Start lever
3 Half shell (transport roller)
4 Screw
5 Weld
ü The rechargeable battery is removed.
1. Place the machine horizontally on a flat surface with sufficient load-
bearing capacity.
2. Secure machine against overturning.
3. Set the start lever 2 to OFF position.
4. Center the half shells 3 around the weld 5 of the guide bracket 1.
5. Attach the half shells with four screws 4 to the guide bracket.
6. Tightening torque 2.5 Nm.
15

Wacker Neuson AS30e Specifications

General

Brand	Wacker Neuson
Model	AS30e
Category	Vibratory rammers & tampers
Language	English