Wacker Neuson BS 60-2 User Manual

BS 60-2 / BS 70-2 Maintenance
wc_tx000926gb.fm 35
5.6 Adjusting the idle speed
See Graphic: wc_gr007402
Refer to Technical Data for correct idle and operating rpm. For best
accuracy, use a tachometer when making idle speed adjustments.
5.6.1 Remove the guard (c).
5.6.2 Start the engine and allow it to warm up to operating temperature.
5.6.3 Set the engine idle speed with engine running at idle and choke (a) fully
open. Adjust idle speed screw (b), in or out, to obtain correct idle
speed.
NOTICE: DO NOT turn the adjusting screw in too tight or you may
damage the carburetor.
5.6.4 Reinstall the guard.

Wacker Neuson BS 60-2 Specifications

General

Brand	Wacker Neuson
Model	BS 60-2
Category	Vibratory rammers & tampers
Language	English