7-18 BA D18 us* 1.1 * D18w700.fm
7 Maintenance
Engine compartment
1. Park the machine in a wash bay or place.
2. Stop the engine – see “Preparing lubrication” on page 7-8.
3. Clean the machine.
Seat belt
Always keep the seat belt clean, as coarse dirt can impair the proper
functioning of the seat belt buckle.
Clean the seat belt (while it remains fitted in the machine) with a mild soap
solution only. Do not use chemical agents as they can destroy the fabric.
Cleaning in a saline environment
1. Park the machine in a wash bay or place – see “Preparing lubrication”
on page 7-8.
2. Check the machine for salt deposits or corrosion. Have corrosion
removed by a Wacker Neuson service center.
3. Clean the machine with a high-pressure cleaner. Clean the machine
ensuring that there are no salt deposits in places that are difficult to
access.
Bear in mind the information on cleaning and maintenance.
4. Lubricate the machine according to the lubrication plan
5. Allow the machine to dry and check it again for salt deposits.
Loose threaded fittings and attachments
Retighten loose connections immediately, and have them immediately
replaced by a Wacker Neuson service center if necessary.
To Next Page
Loading...
Need help?
General
