Wacker Neuson DW90 User Manual

BA D18 us* 1.1 * D18t900.fm 9-11
Technical data 9
9.12 Vibration
Vibration values indicated in m/s².
Directive 2002/44/EC of European Parliament and Council on minimum
health and safety requirements regarding exposure of workers to risks
arising from physical agents (vibration).
Indications on hand-arm vibration
Hand-arm vibration is less than 2.5 m/s² during correct machine operation.
Indications on whole-body vibration
Whole-body vibration is less than 0.5 m/s² during correct machine
operation.
Uncertainty of measurement K has been taken into account for the
specified values.
The degree of vibration is influenced by various parameters.
Some of them are listed below:
• Operator: training, behavior, working method and strain.
• Job site: organization, preparation, surroundings, weather conditions
and material.
• Machine: version, seat quality, quality of suspension system, attach-
ments and condition of attachments.
Precise indications on the vibration degrees cannot be made for the
machine.
Determination of vibration level for the three vibration axes.
• Under typical operating conditions, use the average vibration values
measured.
• In order to obtain the estimated vibration value for an experienced
operator on level ground, subtract the factors from the average
vibration value.
• In case of an aggressive working method or difficult terrain, add the
environmental factors to the average vibration level in order to obtain
the estimated vibration level.
Note:
For further vibration indications, refer to the indications in ISO/TR 25398
Mechanical Vibrations – Directive on Estimation of whole-body vibration
during operation of earth moving machines. This publication uses
measuring values of international institutes, organizations and
manufacturers. It contains information on whole-body vibration for
operators in earth moving machines. For more information on the vibration
values of the machine, refer to Directive 2002/44/EC of European
Parliament and Council on minimum health and safety requirements
regarding exposure of workers to risks arising from physical agents
(vibration).
It explains the values for vertical vibration under heavy operating
conditions.
Vibration
Effective acceleration value for the upper extremi-
ties of the body (hand-arm vibration)
< Trigger value
< 2.5 m/s
2
Effective acceleration value for the body (whole-
body vibration)
< 0.5 m/s
2

Wacker Neuson DW90 Specifications

General

Brand	Wacker Neuson
Model	DW90
Category	Excavators
Language	English