Foreword
Foreword
General
This manual provides detailed information and
procedures to safely repair and maintain the following:
Wacker Neuson PT Series Trash Pump.
This manual is intended to introduce and guide the user
through the latest factory-approved troubleshooting and
repair techniques and practices.
Before you attempt to troubleshoot or make repairs, you
must be familiar with the operation of this machine.
Refer to the operator's manual for specific information on
these topics.
THE INFORMATION CONTAINED IN THIS MANUAL IS
BASED ON MACHINES MANUFACTURED UP TO THE
TIME OF PUBLICATION. WACKER NEUSON
RESERVES THE RIGHT TO CHANGE ANY OF THIS
INFORMATION WITHOUT NOTICE.
California
Proposition 65 Warning
WARNING
Certain vehicle components contain or emit
chemicals known to the State of California to
cause cancer and birth defects or other
reproductive harm.
Trademark Acknowledgment
Wacker Neuson acknowledges the following trademarks
for company names or products mentioned within this
publication:
Lubriplate® is a trademark of Fiske Brothers Refining
Co.
Loctite® and Permatex® are trademarks of Henkel
Corporation.
How to Use This Manual
This manual is designed to provide multiple ways to
locate and access repair information. Read each section
in its entirety before beginning a procedure. Proper
understanding of machine operation and components is
the key to successful diagnostics and repair.
Make use of special information features within this
manual in order to be better prepared to perform repairs.
Always follow manual procedures and safety guidelines.
Never take shortcuts.
Table of Contents
Major machine components or topics of interest are
separated into specific chapters. Each manual lists these
chapters in a main Table of Contents.
Chapter Table of Contents
Each chapter begins with a detailed Table of Contents
related to the specific machine component or system.
Use the Chapter Table of Contents to find specific
component procedural information.
Index
An alphabetical Index is located at the back of the
manual.
Use the Index to find specific components and related
procedures.
Required Tools and Materials
Some procedures will require the use of specific tools
and/or materials. These tools and/or materials will be
listed for reference prior to beginning a procedure.
Specifications
Near the beginning of each chapter is a specifications
list. This listing contains any specifications contained
within the chapter.
Warnings and Cautions
Warning and Caution indicators are located throughout
the manual at specific points of interest. These notices
are given to prevent personal injury, death, and/or
equipment damage. Always heed these notices, and
practice common sense when performing any
maintenance or repair procedure.
Notes
Special notes are given in order to draw attention to
detailed instructions. These notes are intended to give
further important information regarding the machine
and/or a step in a procedure.
5100048604 (12-18) 3
To Next Page
Loading...
Need help?
General
