Heat Gun Model HT3500
English
2 © 2004 Wagner Spray Tech. All rights reserved.
GENERAL DESCRIPTION
This heat gun is a quality power tool. Like any power tool, it can be dangerous when
misused. Read the following instructions carefully and follow all safety precautions. It is
the responsibility of the owner to use the heat gun properly.
Specifications
Housing: . . . . . . . . . . . . .Engineered high-impact corrosion and heat-resistant polymers.
Wattage: . . . . . . . . . . . . . . . . . . . . . .1500 watts on highest setting, 150 watts on lowest.
Heat Output: . . .
Approximately 1350°F on highest setting, approximately 250°F on lowest.
BTU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Approximately 5100 BTUs on highest setting.
Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5 pounds.
Uses
• Soften paint, caulking and putty for easier removal
• Soften adhesives to help remove stickers and floor tiles
• Bend plastic pipes
• Shrink tubing for electrical work
• Shrink plastic film for wrapping or weatherproofing
• Loosen rusted nuts, bolts and fittings
Touch Pad
The electronic touch pad gives you a wide temperature range to choose from, depending
upon the type of project.
Power button: Turns the heat gun ON and OFF
Select button: Determines the temperature range and fan speed of the heat
gun, or switches the heat tool into
cool down mode.
Temperature selectors: Sets the temperature within the HIGH or LOW temperature ranges
Mode indicator: Shows the temperature range in which you are operating
Temperature indicator: Shows the current heat output of the heat gun
To Next Page
Loading...
Need help?
General
