500-62201-001 Rev. M Page 27 of 33
Connecting to a Serial Printer
To print a report to a serial printer, the following
equipment is needed: L622, coiled modular serial cable,
DB25P to RJ11 adapter, and a serial printer.
• The serial printer must be ON, on line and configured
for 9600 baud, 8 data bits, no parity, 1 stop bit.
• Plug one end of the modular serial cable into the
COMM port of the L622.
• Plug the other end into the DB25P to RJ11 modular
adapter.
• Plug the DB25P to RJ11 adapter into the serial
printer.
• Follow the Print Report instructions.
DB25P to RJ11 Adapter Pin Assignments
Pin Description
2 Receive
3 Transmit
7 Ground
1 No Connection
4-6 No Connection
8-25 No Connection
DB9S to RJ11 Adapter Pin Assignments
Pin Description
2 Transmit
3 Receive
5 Ground
1 No Connection
4 No Connection
6-9 No Connection
To Next Page
Loading...
Need help?
General
