Cleaning and Maintenance
The spray gun can only operate satisfactorily if it is cleaned and preserved after each
use.
Attention! Never immerse the spray gun in liquid when cleaning.
Empty out the remaining paint from the container.1)
Put proper thinner in the container and trigger the sprayer for approx. 2 seconds.2)
Pull the main plug out of the socket.3)
Disassemble the spray gun as shown in Illus. 9 (spare parts).4)
Thoroughly clean all soiled parts.5)
Reassemble the parts in reverse order.6)
Put a few drops of oil (e.g. sewing machine oil) in the intake and runback holes (Illus. 7)
7, arrow). Briey switch on the spray gun.
Accessories W 180 P (not included in scope of delivery)
Designation Order No.
Round spray nozzles for various spray materials:
Thick spray materials / nozzle size: 1.0
Very thin spray materials/nozzle size: 0.5
0046 906
0046 894
Paint container with cover 0413 909
Needle-jet nozzle 0209 045
Flexible nozzle extension with atomiser 0046 675
Flexible Nozzle Extension (Illus. 4+8)
For spraying ceilings, resting objects or hard-to-reach areas e.g. radiators
Spare Parts List (Illus. 9)
Pos Name Order No.
1 Suction tube 0413 305
2 Paint container with cover 0413 909
3 Nozzle 0,8 mm 0046 903
4 Locking nut 0413 310
5 Valve 0209 042
6 Pump housing 0413 202
7 Piston spring 0033 028
8 Piston 0198 207
9 Nozzle spanner 0199 327
10 Viscosity measuring cup 0209 058
To Next Page
Loading...
Need help?
General
