Page 39
3.10.5 User Interface (Controller)
The user interface (controller) needs to be connected by plugging it into the corresponding plug
which can be found in the installer’s wiring terminal. The interface can be plugged directly into
the unit or further away in the property by using the supplied extension cable. This extension
cable is 10m long and this can be further extended up to a maximum length of 200m. The
extension cable can be extended by joining with a 5-core cable with wire gauge of 0.5mm
2
. The
cable should be joined in such a way so that the connectors are located at each end for joining
to the unit or the interface as appropriate.
To Next Page
Loading...
Need help?
General
