4
Waves Nx Head Tracker – User Guide
Functions and Features
Battery
The Nx Head Tracker device works with any standard AAA battery,
which provides approximately 40 hours of use. Replace the battery
through the bottom hatch. The device will go to sleep automatically
after a few minutes if it’s not connected or not moving. In sleep
mode, the battery life can last for months.
Attaching the Nx Head Tracker to Your Headphones
After you insert a AAA battery into the Nx Head
Tracker, position the device at the top-center of
the headphone arc, with the Nx logo facing
forward (i.e., the battery in the back). The Nx
Head Tracker will not track your head movements
properly if you place it off-center or facing
backward.
Wrap the strap around the headphone’s
headband and attach it to the hook on the other
side. The strap can be disconnected at both ends
for replacement and any standard rubber band
can be used if needed.
Button Functions
A short press (under two seconds) in any state will place the unit
in advertising mode. In this mode, the device can be detected and
paired with your computer.
To Next Page
Loading...
General