Marine heating system Installation Instructions
© Webasto Global Comfort Solutions
®
3
1 Safety instructions
Heating systems should only be installed by an authorized Webasto
®
Partner.
If you want to install a Webasto
®
heater system yourself:
The installation assumes that you have sufficient technical and craft knowledge and skill.
Unskilled installation can endanger life!
Before first use, the heating system must be checked by an authorized
Webasto
®
Partner!
This is both for your safety and for the safety of third persons.
• With do-it-yourself installation: The installation is extensive and can take, depending on the
boat type and size, between 8 and 40 hours. It presupposes sufficient technical and
craftwork knowledge and skills, for example in boat construction, marine electrical systems,
heating engineering and fuel systems.
• Incorrect installation or repair of Webasto
®
heating systems may cause a fire or
result in the emission of carbon monoxide, which can be fatal. Serious or fatal
injuries can be caused as a result.
• Observe carefully: applicable accident prevention regulations and workshop and
work safety instructions.
• Observe regional regulations! Clarify which regulations apply for the planned use
of the boat. Check these! If necessary, obtain official permission.
• ALWAYS obey: Installation and repair instructions. If there are any doubts, safety questions
or technical questions: obtain professional support from an authorized Webasto
®
Partner
(www.webasto-marine.com
) or the Webasto
®
Support Hotline!
• Failure to observe individual points can lead to damage to the heating system or the boat.
Pay attention to all warnings!
• Follow the technical rules!
• Only use original accessories and original spare parts.
• Only use approved Webasto
®
control components! Otherwise there is a risk of malfunctions.
• For accessories, installation and assembly components, see the Webasto
®
parts catalog
• The example installations shown in this documentation are for information purposes only. No
liability can be derived from the installation examples shown.