Webasto Thermo Call TC3 User Manual

Thermo Call TC3
12
- Insert the micro-timer in a free slot of the
4-pin connector of the heater wiring har-
ness
Final connection and
commissioning
- Connect the 12-pin connector of the
GSM module wiring harness to the mod-
ule
- After connecting voltage, the button will
flash 2x cyclically
- After approx. 1 minute, the button will
flash 1x cyclically and, depending on the
dial-in time of the SIM card, can take a to-
tal of up to 5 minutes until it is finally
ready for operation
- As soon as operational readiness is
achieved, program the Thermo Call TC3
and put it into operation according to the
operating instructions
- To query the firmware version send the
text message command "VERSION" to
the Thermo Call TC3

Webasto Thermo Call TC3 Specifications

General

Brand	Webasto
Model	Thermo Call TC3
Category	Controller
Language	English