MultiControl | SmartControl | UniBox 2
Table of Contents
1 About This Document 3
1.1 Purpose of the document 3
1.2 Documents supplied 3
1.3 Use of this document 3
1.4 Use of symbols and highlighting 3
1.5 Liability waiver 3
2 Safety 4
2.1 Intended use 4
2.2 Qualification of the installation personnel 4
2.3 Regulations and statutory provisions 4
2.4 Safety instructions 4
3 Device Description 5
3.1 Delivery scope 5
3.2 Identification plate 5
3.3 Description of Functions 5
3.4 Device versions 5
3.5 Use 5
4 Installation of the Control Element 6
4.1 Recommendations for installation 6
4.2 Requirements for the installation location 6
4.3 Install control element 6
4.4 Optional: Install UniBox 7
5 Initial Start-up 9
5.1 Recommendations for initial start-up 9
5.2 Put the device into operation 9
5.3 Select heater 9
6 Technician Mode 11
6.1 Description of Functions 11
6.2 Connection of the diagnostic adapter 11
6.3 Select the Service menu 11
7 Fault Remedy 12
7.1 Error code 12
8 Technical Data 14
9 Annex 15
9.1 Connections 15
9.2 Technician Mode 16
9.3 Schematic Overview of Service Menu 19
To Next Page
Loading...
Need help?
General
