2
CELL PHONE SIGNAL BOOSTER HOME 4G
______
Step 1: Preparation
NOTE: These instructions will walk you through a “soft” install process to find the
optimal locations for the inside and outside antennas, then through the process of the
permanent installation.
You Will Need (tools not included)
Make sure the following materials are prepared and ready for your installation.
o Ladder
o Phillips-head screwdriver
o 10mm open-end wrench or adjustable wrench
o Drill (if routing cable through wall)
o Mounting Option
A
: 1-2” diameter pole (#901117) or an
existing pole
o Recommended: Power Strip with surge protection
1 to 2 hours
2 people (a person to help with antenna calibration)
To Next Page
Loading...
Need help?
General