weinor WeiTronic Remoto 1M - User Manual

Operating Instructions
Nameplate
The nameplate is located on the
back of the handheld remote
control (see Fig. Changing the
Battery).
Approved Use
The WeiTronic Remoto 1M hand-
held remote control is solely
designed for the purposes of
controlling sun protection sys-
tems such as lamella outdoor
blinds, roller blinds, and jointed
arm and vertical awnings.
Technical Specifications
Nominal voltage 3V DC
Battery type Coin cell 2430
Protection class IP 20
Ambient temperature –10°C to 55°C
Radio frequency 868.3 MHz
Dimensions 118 x 53 x 21 mm
Weight 80 g
Selecting the Operating Mode
• Manual operation: manual commands
such as , ,  are selected by pressing
the relevant button.
• Automatic operation: manual com-
mands plus automatic sun control.
• To change the operating mode, press
the Select button (8) (for longer than
1 second.
• Changing from manual to automatic
operation will cause the products to
retract.
Transmission Check
The channel display doubles up as the
transmission check. Should a radio signal
be received, this will be signalised by
flashing. Should the battery performance
run down, the brightness of the display
will dim and the frequency range will
drop. If the control lamp stop flashing
when a button is pressed, the battery will
need to be replaced.
Automatic Wind Control
When there is a risk of high winds, the sun
protection system will retract and remain
shut down for approx. 15 minutes. Should
the  or  button be pressed during the
shutdown period, the product will move
very slightly to signal that the system is
still shut down. Please note: The automatic
wind control cannot be deactivated.
Lux and Tempura
Jointed arm awnings are also available as
extras with lighting (Lux) and heating
systems (Tempura).
• To activate these options, press the  or
 button (for less than 1 second).
• Hold the  or  button down to dim
the lighting.
• Press the  button to switch off either
the lighting or the heating.
Handheld Remote Control
WeiTronic Remoto 1M
㛯㛯㛯
www.weinor.com
(1) Channel display
(2) Operating mode display:

Manual

Automatic
(3)  Up On/Brighten*
(4)  Stop Off*
(5)  Down On/Dim*
(6) Rocker button Up
Brighten*
(7) Rocker button Down
Dim*
(8) Selection button for
operating mode
* Lux, Tempura

Summary

Product Identification and Features

Nameplate and Approved Use

Details on the nameplate location and the intended applications for the remote control.

Technical Specifications

Key technical details including voltage, battery type, protection class, ambient temperature, frequency, dimensions, and weight.

Operating Mode Selection

Instructions on how to switch between manual and automatic operation modes for the remote control.

Transmission and Wind Control

Information on checking transmission status and the automatic wind control function.

Lux and Tempura Features

Details on activating and controlling optional lighting (Lux) and heating (Tempura) systems.

Maintenance and Troubleshooting

Changing the Battery

Step-by-step guide for replacing the battery in the handheld remote control.

Power Setting Programming

Instructions on how to set and program power levels for Lux and Tempura features.

Cleaning and Declarations

Guidance on cleaning the device and relevant declarations of conformity and application.

Troubleshooting Guide

Lists common errors, their causes, and suggested remedies for the remote control system.

weinor WeiTronic Remoto 1M Specifications

General

Brand	weinor
Model	WeiTronic Remoto 1M
Category	Remote Control
Language	English