EasyManuals Logo
Home>West Bend>Bread Maker>Breadmaker

West Bend Breadmaker User Manual

West Bend Breadmaker
73 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
English - 12
CRUST and COLOR THICKNESS
Dark crust color/too thick
Too much sugar – Reduce sugar by half.
Loaf of bread is burned
Breadmaker is malfunctioning – See Warranty page for service information.
Crust too light
Not enough sugar or fat – Increase sugar or fat by half the amount recommended.
BREAD PAN PROBLEMS
Knead blade cannot be removed
Add warm water to the bread pan and allow the knead blade to soak before trying
to remove. Follow the cleaning instructions. You may need to twist the knead
blade slightly after soaking to loosen. Do not immerse the bread pan in water.
Bread sticks to bread pan/difficult to shake out
Can happen over prolonged use – Wipe the inside of the bread pan, from the ribs
down with vegetable oil or solid shortening. Or add 1 tsp. vegetable oil to the
liquid in the bread pan before adding dry ingredients. Do not use vegetable spray
as sticking can worsen. Or, let bread sit in bread pan for 10 minutes before
shaking out. Replacement bread pan may be ordered. See Warranty section.
MACHINE MECHANICS
Ingredients not mixed
Did not start machine – After programming the control panel, press the
“START/STOP” button to turn on.
Forgot to put knead blade in bread pan – Always make sure the knead blade is on
the shaft in the bottom of the bread pan before adding ingredients.
Burning odor noted during operation
Ingredients spilled inside oven – Be careful not to spill ingredients when adding to
the bread pan as they will burn on the heating unit and cause smoke.
Bread pan leaks – Replacement bread pan may be ordered. See Warranty
section.
Exceeding capacity of bread pan – Do not use more ingredients than
recommended in recipe and always measure accurately.
Machine unplugged by mistake or power lost during use for longer than 5
minutes. How can I save the bread?
If machine is in knead cycle, reprogram to the same bread setting and turn the
machine back on.
If machine is in rise or bake cycle, preheat conventional oven to 350°F (177°C).
Carefully remove the bread pan from the machine and bake on rack in center of
oven for 20-25 minutes or until golden brown.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the West Bend Breadmaker and is the answer not in the manual?

West Bend Breadmaker Specifications

General IconGeneral
BrandWest Bend
ModelBreadmaker
CategoryBread Maker
LanguageEnglish

Related product manuals