30
Usin
the Scanne
Mirroring
Select this symbol to scan an image vertically and/or horizontally mirrored.
Use the buttons (2) and (6) to set up the different flipping methods. Press the start
button (5) for confirmation.
The effect of each set up method can be checked on the display before scanning.
Playback Images
Press the playback button (2) to enter playback mode. The scanned stored on the
internal memory or on the inserted SD card are shown on the display. Press the
buttons left (2) and right (6) to skip to the previous or to the next image.
Playback Menu
In playback mode, press the start button (5) to
enter the playback menu. Seven menu icons
appear on the display.
Press the buttons left (2) and right (3) to move
the yellow frame that indicates the selected
menu item, one step to the left or to the right.
Press the start button (5) to confirm the
selection.
Single Image
Select this symbol and press the start button (5) for confirmation. Press the
buttons left (2) and right (6) to skip to the previous or to the next image.
Slide Show
Select this symbol and press the start button (5) for confirmation. Starting
a slide show all images are shown continuously on the display of the scanner (or
on the connected video monitor). Playback of the images starts as soon as this
function has been selected. Press any button to stop the slide show.
To Next Page
Loading...
General