Mounting to a Wall or Floor
Bracket Position:
Mounting to a WF-89xxPEC
Bracket Position:
e brackets will slide into the slots on the back of the power center, with the screws in the
top of the power center going through the bracket to hold it in place.
Mounting to a WF-85xx
Bracket Position:
No bracket is necessary. e mounting holes for the bracket on the EM-15 / EM-20 have
corresponding holes on the back of the 85xx series power centers. Remove the brackets
and use the bracket screws to mount the EM-15 / EM-20 directly to the back of the power
center.
8