19
Operations
Operating The Machine
1. This machine can be operated in either direction.
For smaller areas operate the machine by pulling
rearward.
2. For larger unobstructed areas, flip the handle and
use the machine's brush assisted propelling
motion.
Start at wall closest to power outlet. For small areas,
pull straight back without pushing down on handle.
Release intermittent trigger switches or turn off contin-
uous setting on solution switch approximately 1 foot
before ending cleaning pass.
Push down on handle to raise vacuum shoe and brush
before moving to the next cleaning pass. Overlap
brush contact area approximately 1 inch.
1 ft.
(30 cm)
STEP 3
1 in.
(25mm)
STEP 4
STEP 1
STEP 2
1
2
86302100 CLIPPER DUO
To Next Page
Loading...
Need help?
General
