Windsor Clipper CLP12 User Manual

CLEANING PROCEDURE
CLIPPER 98630 12/14/98
10
Release intermittent trigger
switches or turn off continuous
setting on solution switch
approximately 1 foot before ending
cleaning pass.
Push down on handle to raise
vacuum shoe and brush before
moving to the next cleaning pass.
Overlap brush contact area
approximately 1inch.
STEP
1
STEP
2
STEP
3
Start at wall closest to power outlet.
For small areas, pull straight back
without pushing down on handle.
1in.
(25mm)
OFF
1ft.
(30cm)
1. This machine can be operated in either
direction. For smaller areas operate
the machine by pulling rearward.
2. For larger unobstructed areas, flip the
handle and use the machine’s brush
assisted propelling motion.
1
2

Windsor Clipper CLP12 Specifications

General

Brand	Windsor
Model	Clipper CLP12
Category	Floor Machine
Language	English