45
Maintenance
3. Press brush release. Brushes will drop downward.
Remove old brushes.
4. Slide new brushes into receptacle at far side of
deck, lift upward and snap into position. Ensure
brushes are secure.
5. Close side squeegee and latch securely.
Removal or Installation of Debris Bin
(Cylindrical)
NOTE: On models with chemical metering system,
scrub deck needs to be lowered to remove debris bin.
1. From right side of machine, lift debris bin and sllde
out.
2. Re-install in reverse order.
86398220 Operators Manual - Chariot-2 iScrub 20
Debris Bin
Slide out
To Next Page
Loading...
Need help?
General