Pro STAR Industries
1590-A N. Harvey Mitchell PKWY
Bryan, TX 44503
979-779-9399 1-800-262-7104
WAVE Instructions page 8
MAINTENANCE
DAILY MAINTENANCE
1. Shake down bag daily.
2. Check power cord for damaged or frayed
insulation.
3. Return brush adjustment lever to store RE”
position when the machine is not in use.
4. Check for and remove any lint or debris
around brush and brush housing.
REGULAR/PERIODIC MAINTENANCE
1. Every 4 to 6 months remove wheels, clean
axles, and apply a thin coat of silicone lubricant to axles.
2. The filter bag can be washed twice before
losing the filtering capability. This should be done using
a mild detergent in cool water and hung up to drip-dry.
3. Inspect and clean vac motor filters.
4. Periodically inspect all hoses, electrical
cables, filters, gaskets and connections on your
machine. Frayed or cracked hoses should be repaired or
replaced to eliminate vacuum loss.
5. The electrical cable must be well insulated, if
the cable insulation is broken or frayed, repair or replace
it immediately. Don’t take chances with electrical fire or
shock
SUGGESTED SPARE PARTS LIST
BELT 11041
PAPER BAGS 140168
(PACKAGE OF 10)
VAC MOTOR FILTER 34012
REAR EXHAUST FILTER 34309
CLOTH BAG 140164
VACUUM MOTOR
CARBON BRUSH 140211
BRUSH MOTOR
CARBON BRUSH
2 REQUIRED PER MOTOR 140212
To Next Page
Loading...
Need help?
General
