Ready to Travel?
To stow the unit when you are ready to travel:
Press [Power] one time.
The unit will stop what it is doing and begin to return to the stowed position. The TRAV’LER Interface WILL NOT
TURN OFF unless the TRAV’LER mount is successfully stowed.
Manual Mode:
The TRAV’LER antenna is an extremely versatile satellite antenna and can be manually set to nd many different
satellites individually. NOTE: This function is rarely used.
To enter the Manual Search Mode while the TRAV’LER is stowed:
Press the [Power] button and hold it for two seconds to turn the unit on.
While the Trav’ler Interface reads:
Press and hold the [Enter] button for two seconds.
The TRAV’LER Interface will ask if you wish to enter the User Menu:
Press [Select] to choose YES and then press [Enter].
The User Menu consists of four choices:
Search Mode
Diagnostics
Installation
Exit
NOTE: Diagnostic and Installation Menus are not required for normal operation and should only be entered by a
trained professional.
POWER OFF
STOWING
4
WINEGARD BURLINGTON
POWER ON
ENTER USER MENU
*YES NO
OPERATION
LG SHAW DIRECT
STOWING
To Next Page
Loading...
Need help?
General
