Winix ZERO 360 User Manual

5 - S TA G E A I R PUR IFIER
ZERO 360
11
INITIAL OPERATION
1. Turn the product upside down.
2. Grab the handle at the bottom of the
product, turn anticlockwise, and pull out
the filter cover.
3. Remove the protective vinyl from the
filter installed inside the product.
BOTTOM
4. Install the filter, top side down, into the
bottom of unit, until it is fully inserted.
Thetop of the filter shows the opening and
the bottom of the filter is solid.
5. After installing the filter, turn the handle
clockwise to close the filter cover.
6. Return the product to an upright position
and resume normal operation.

Winix ZERO 360 Specifications

General

Brand	Winix
Model	ZERO 360
Category	Air Cleaner
Language	English