Winix ZERO 360 User Manual

5 - S TA G E A I R PUR IFIER
ZERO 360
13
FREQUENTLY ASKED QUESTIONS
Problem Check / Actions to take
The unit does
not turn on
at all
• Is the plug securely
attached to the outlet?
- Make sure the outlet
has power going to
it, and ensure the
plug is secured.
• Is there a power
outage?
- Check to see if
other lights and
electrical equipment
are working and try
again.
The unit
doesn’t work
in Auto Mode
• Has Auto Mode been
selected?
- Press the Fan Speed
button until Auto
Mode is selected.
• Is the sensor blocked
or clogged?
- Clean the smart
sensor.
Problem Check / Actions to take
It vibrates
and makes a
lot of noise
• Is it running on a
slanted or uneven
surface?
- Move the unit to a
hard, flat, even area.
The power
plug and
outlet feel hot
• Is the plug securely
plugged in?
- Make sure the plug is
properly plugged into
the outlet.
There is a
strange smell
• Is it being used in a
place with a lot of
smoke, dust, or odours?
- Clean the air intakes
on either side and
clean the Pre-Filter.
- Replace the New 360
All-in-one True HEPA
filter.
The fan
strength is
weak. The
unit is not
purifying the
air
• Is the Check Filter
Indicator light on?
- Change the filters as
required.
item : 1712-0118-01
this unit
is compatible
with this
filter
FILTER
GR
Resetting Filter Life:
After replacing the New 360
All-in-one True HEPA filter,
use a small object such as
a While the unit is on, hold
the Filter Reset Button for
at least 5seconds until you
hear the beep. After the
beep, the Filter Replacement
Indicator will disappear.
REPLACING FILTERS

Winix ZERO 360 Specifications

General

Brand	Winix
Model	ZERO 360
Category	Air Cleaner
Language	English