Winix ZERO 5 User Manual

USER MANUAL WINIX ZERO 5 AIR PURIFIER
Page 5
Allow 30 ~ 45 cm of space between TVs, radios, and other electronic products electromagnetic interference from
certain electronics may cause product malfunction.
Place indoors away from direct sun light direct exposure may cause product malfunction or failure.
Only place on hard, at surfaces imsy or slanted surfaces may result in abnormal noise and vibrations.
30~45 cm
10 cm
Follow these instructions to reduce the risk of serious injury or death and
to reduce risk of damaging the unit.
Do not use around mist or fumes from
industrial oil or around large quantities of
metallic dust.
Do not place around heating elements.
Do not install in any sort of motor or
transport vehicle (trucks, boats, ships,
etc.).
Do not place in an area with excessive
amounts of noxious gases.
Do not place near any ammable materials
(aerosols, fuel, gases etc.).
Do not have unit facing into wind or draft.
Do not place below any electrical outlet. Do not place in excessively humid areas
where unit may become wet.
WHERE TO USE

Winix ZERO 5 Specifications

General

PlasmaWave Technology	Yes
Auto Mode	Yes
Sleep Mode	Yes
Weight	7.3 kg
Warranty	2 years
Room Size	Up to 99 m²
Pre-filter	Yes
Activated Carbon Filter	Yes
Air Quality Sensor	Yes
Fan Speeds	4
Power Consumption	70W
Room Coverage	360 sq. ft.
Filter Life	HEPA Filter: 12 months, Activated Carbon Filter: 12 months
HEPA Filter	Yes (99.97% efficiency at 0.3 microns)

Summary

5-STAGE AIR PURIFICATION OVERVIEW

CONTROL PANEL FUNCTIONS

Power Button Operation

Turns the unit on or off.

Mode and Fan Speed Selection

Cycles through fan speed and operation modes.

Timer and Air Quality Light Control

Sets timer and controls Air Quality light.

PlasmaWave® Feature Toggle

Toggles the PlasmaWave® feature on/off.

WHERE TO USE GUIDELINES

Important Usage Warnings

Instructions to reduce risk of serious injury, death, or unit damage.

INSTALLING AIR PURIFIER FILTERS

FILTER INSTALLATION AND MAINTENANCE

Filter Installation Steps

Steps for inserting filters in the correct order.

Filter Service and Replacement Schedule

Filter maintenance schedule and replacement information.

GENERAL SAFETY AND CAUTIONS

Filter Installation Safety

Ensure filters are inserted before running unit.

Vent Insertion Hazard

Warning against inserting objects into vents.

Electrical Safety Precautions

Caution regarding wet hands and interior contact.

General Operation Safety Guidelines

Key safety instructions for operation and handling.

INITIAL UNIT OPERATION

Powering Up the Unit

Step-by-step guide to initial power-up.

AUTO AND SLEEP MODES

Auto Mode Operation

Automatic operation based on air quality sensors.

Sleep Mode Operation

Quiet operation mode for nighttime use.

MANUAL MODE, TIMER, AND PLASMAWAVE®

Manual Mode Fan Speed Control

Manually selecting fan speed (Low, Medium, High, Turbo).

FILTER ASSEMBLY AND REPLACEMENT

Filter Installation Procedure

Steps for inserting new filters in the correct order.

CRITICAL SAFETY INSTRUCTIONS

Unauthorized Repairs Warning

Warning against unauthorized repairs or modifications.

Damaged Power Cord or Plug

Safety warning for damaged power components.

Voltage Compatibility Requirement

Requirement to use only AC 220-240V.

Power Cord Handling Precautions

Wet Hand Operation Safety

Electrical shock prevention when handling plugs.

Cleaning Agent Restrictions

Vent Insertion Hazard Warning

Flammable Gas Proximity Warning