Winix ZERO 5 User Manual

USER MANUAL WINIX ZERO 5 AIR PURIFIER
Page 9
1. Insert the power cord into an electrical outlet.
• The Control Panel lights will turn on and o󰀨.
2. Press the ‘Power’ button.
NOTE : During the rst 4 minutes of power up, the Air Quality light will ash as the Smart Sensors measure the
air quality in the environment, after which normal operation will begin.
3. By default, when the unit rst powers on, the mode
will be set to Auto with PlasmaWave
®
enabled.
• When in Auto mode, the fan speed will be auto-
matically adjusted according to the environments
air quality.
• PlasmaWave
®
works to remove harmful airborne
contaminants.
NOTE :
• In Auto mode, as the indoor air quality improves, the fan speed will automatically be reduced to Low.
• When the unit is running, you may hear a chirping or buzzing sound. The sound is from large particles pass-
ing through PlasmaWave
®
, it is normal and does not signify product failure. To disable PlasmaWave
®
, see
page 11.
INITIAL OPERATION

Winix ZERO 5 Specifications

General

Brand	Winix
Model	ZERO 5
Category	Air Cleaner
Language	English